AMSOIL HP MARINE Synthetic 2-Cycle Oil
AMSOIL hp Injector is now AMSOIL HP Marine.
Same premium formulation, new look.
AMSOIL MARINE - Product Code Pkg./Size
HPMQT-EA / Quart Bottle
HPMQT-CA / Quart Bottles (case of 12)
HPM1G-EA / Gallon Bottle
HPM1G-CA / Gallon Bottles (case of 4)
HPM16-EA / 16-Gallon Keg
HPM30-EA / 30-Gallon Drum
HPM55-EA / 55-Gallon Drum
HPM27-EA / 275-Gallon Tote
- Excellent for Evinrude® E-TEC™ factory-lean setting (replaces Evinrude XD100™ 2-Cycle Oil)
- Superior performance in DFI outboard motors
- Reduces piston and combustion chamber deposits
- Protects against "ring jacking" common to DFI outboards
- Low smoke, low odor product
- Contains up to 30 percent more additives for "super clean" operation
- Reduces wear for long engine life
- Protects against rust during downtime
- Multi-functional and recommended for use in many two-cycle motors
- Low aquatic toxicity - Environmentally Friendly
- Recommended for use as injection oil or at a 50:1 pre-mix
High-quality motor oil is critical for maximum performance in modern two-cycle marine motors. Direct fuel injection (DFI) improves combustion efficiency, delivering the extra power enthusiasts want, while leaner gas-to-oil ratios provide the reduced exhaust emissions the government mandates. The leaner ratio leaves less oil to lubricate and protect these hotter, more powerful motors, which invites deposits and wear that threaten engine performance and life. HP Marine is proven to excel in these harsh challenges. It controls performance-robbing friction, heat and wear, yet produces low smoke and has low aquatic toxicity properties. It's an oil as advanced as the engines it protects.
Outstanding Wear Protection
The elevated heat and friction of modern two-cycle marine motors can exceed the film strength of inferior oils, increasing the likelihood of scuffing and wear. HP Marine's exclusive synthetic formulation provides increased lubricity for reduced wear during normal and lean-mix operation (see field study results). In 534 hours of field testing, HP Marine completely prevented piston skirt and cylinder bore scuffing, demonstrating its superior lubricity and ability to reduce friction between moving parts. It maintains a strong lubricating film even in lean-mix, severe-service conditions, helping marine engines achieve maximum life.
Excellent Deposit Control
HP Marine is formulated with MAXDOSE™, a system of advanced additives for "super-clean" operation. It helps prevent deposits that lead to poor performance. In field testing, HP Marine inhibited ring deposits that can cause ring sticking and ring jacking (carbon build-up behind the ring, forcing it outward), a phenomenon that occurs in modern DFI outboard motors. It also virtually eliminated exhaust port deposits for reliable, efficient operation.
AMSOIL HP Marine™ is recommended for use in all two-cycle outboard motors including, but not limited to, Johnson® and Evinrude® FICHT® & E-TEC™ (replaces XD100™ 2-Cycle Oil); Mercury® EFI & Optimax®; Yamaha®; Nissan® and Tohatsu® TLDI®; Suzuki®; Mariner® and Force®. It is also recommended for use in all two-cycle personal watercraft (PWC). Use as injection oil or as 50:1 pre-mix (2.6 oz. per U.S. gallon of gas) where NMMA TC-W3 or API TC oils are specified. Compatible with mineral and synthetic TC-W3-type two-cycle oils; however, mixing two-cycle oils should be minimized.
Proven in Marine E-TEC Field Study
AMSOIL HP Marine was installed in a 250-hp Evinrude E-TEC engine powering a heavy-duty marine rescue vessel. Following a 28-hour break-in period at the normal oil setting, the engine was programmed to its factory-lean setting and operated for 506 hours prior to disassembly. An ASTM calibrated rater examined and awarded each component either a merit rating on a scale of 0 to 10 (with 10 representing no distress) or a percentage rating (with 0 percent representing no distress). Results prove HP Marine provided exceptional wear protection and deposit control. For complete study results, visit amsoil.com/proof.
TYPICAL TECHNICAL PROPERTIES
Amsoil hp MARINE Synthetic 2-Cycle Oil
Kinematic Viscosity @ 100°C, cSt (ASTM D-445)= 8.5
Kinematic Viscosity @ 40°C, cSt (ASTM D-445)= 46.8
Viscosity Index (ASTM D-2270)= 160
Pour Point °C (°F) (ASTM D-97)= -46 (-51)
Flash Point °C (°F) (ASTM D-92)= 86 (187)
Fire Point °C (°F) (ASTM D-92)= 86 (187)
ASTM Brookfield Viscosity @ -40°C (°F), cP 14025 NMMA TC-W3® Rust Test Pass Jaso M 342-92 Smoke Test (FD). Pass
TC-W3 Lubricity Test (ASTM D 4863) Pass
OECD - Guideline 203, Fish Acute Toxicity Test . 100% Survival Rate
OECD - Guideline 202, Daphnia Acute Immobilization Test 100% Survival Rate
DANGER: harmful or fatal if swallowed. Contains synthetic lubricant and petroleum distillates. If swallowed do not induce vomiting. Contact a physician immediately.
Keep away from fire, heat and open flame. Use with adequate ventilation. Avoid frequent or prolonged skin contact. Flush eyes with water for 15 minutes in case of contact. KEEP OUT OF REACH OF CHILDREN.
Need to place your Order at wholesale right NOW??
1. CLICK HERE to go to the AMSOIL Corporate Website, add the "Preferred Customer Registration" product to your CART, and the rest of your ONLINE shopping will be at wholesale pricing. See the example picture below.
Click Here to Go To The AMSOIL Inc. Preferred Customer Registration Page