AMSOIL Exterior Ceramic Spray
AMSOIL Exterior Ceramic Spray is a sprayable SiO2 ceramic topper that locks in deep gloss and rapid water shedding on painted and plastic exterior surfaces. The spray-on, wipe-off formula installs in a single pass with no cure time, and one application protects against the elements for up to 12 months. Detailers, weekend cleaners, and powersports owners looking for long-lasting ceramic protection without the cost and downtime of a permanent coating reach for this product.
Advanced SiO2 ceramic chemistry
Exterior Ceramic Spray uses the latest SiO2 ceramic technology in a sprayable carrier that bonds at room temperature, with no heat lamps, polishers, or specialty installer tools needed. Each application lays down a thin, durable layer that resists water spotting, dust, road grime, and weathering far better than carnauba wax or short-life polymer sealants. The chemistry is designed to be reapplied, and there is no concern with overtreatment, so the protective film can be reinforced any time the finish loses bead or sheen between full ceramic services.
Extreme hydrophobicity for fast water sheeting
The cured film is engineered for extreme hydrophobicity, so water beads tightly and rolls off painted panels instead of sheeting and pooling. Rapid water shedding cuts drying time after a wash, prevents the mineral residue that causes water spotting, and helps push road salt, dust, and surface contamination off the vehicle in rain. The treated finish stays cleaner between washes and dries with fewer towel passes.
Deep gloss enhancement
Exterior Ceramic Spray enhances paint depth and clarity on factory clear-coats and on previously polished finishes. The thin ceramic film amplifies reflectivity and produces a rich, wet-look gloss across painted bodywork. Because the formula is built to be reapplied at any interval without harm, gloss can be refreshed seasonally or after any heavy wash without stripping the prior coat.
UV defense for paint and plastic
The cured layer shields paint and exterior plastic trim against ultraviolet rays that fade clear-coats, oxidize black plastic, and dull pigmented panels over time. UV-stable ceramic chemistry is what allows the product to deliver up to 12 months of outdoor durability under typical conditions. Vehicles parked outdoors year-round, garaged collector cars taken out for summer driving, and powersports rigs exposed to sun on the trailer all benefit from the added UV barrier.
Spray-on, wipe-off application with no cure time
Application takes minutes. The product mists onto a clean panel, gets leveled with a clean microfiber towel, and is then wiped to a streak-free finish before moving to the next section. There is no curing window, no infrared lamp, and no IPA prep step required, and the vehicle can be driven or stored immediately after the final wipe. That installation profile keeps a full-vehicle ceramic refresh inside a standard wash-and-detail session rather than a full weekend lockout in the garage.
Safe on painted bodywork and plastic trim
Exterior Ceramic Spray is formulated to be compatible with painted bodywork and exterior plastic. Unlike traditional waxes, which can dry white and chalk on satin black bumpers, textured cladding, or motorcycle plastics, the ceramic formula will not stain plastic surfaces. That makes it practical to mist across entire panels, including fender flares, bumpers, and powersports body plastics, without masking off trim sections first.
Recommended applications and how to apply
Exterior Ceramic Spray is built for the post-wash protection step on automobiles, light trucks, motorcycles, ATVs, UTVs, snowmobiles, and other powersports equipment with painted bodywork or exterior plastic. The product is not a cleaner; it must be applied to a clean, dry surface for the chemistry to bond properly.
- Wash the vehicle first with AMSOIL High-Foam Car Shampoo and dry the surface before applying.
- Move the vehicle to a cool, shaded area and confirm panels are out of direct sunlight before spraying.
- Working from the top down and one panel at a time, mist evenly, then wipe with a high-quality microfiber towel; over-saturation can streak, so swap to a fresh towel as it loads up.
- Reapply at any interval to maintain gloss and water beading; harsh environments with heavy road salt, dust, or dirt may shorten coating life.
For light dust, fingerprints, or water marks between full applications, AMSOIL Quick Detailer is the recommended companion product for safe surface cleaning before the next ceramic refresh.
Order AMSOIL Exterior Ceramic Spray
Exterior Ceramic Spray ships in a 16 oz. spray bottle (product code CSFCN-EA) or as a case of 12 (product code CSFCN-CA), and the product is covered by the AMSOIL Limited Warranty. Use the AMSOIL Vehicle Lookup Guide to pair the spray with the correct synthetic motor oil, filters, and gear fluids for the vehicle, or browse the full AMSOIL product catalog for additional cleaners and protectants. Place an order through the AMSOIL Exterior Ceramic Spray listing.
Customer reviews
Deep Shine
Excellent weather protection.
By Cedric on June 05, 2026.
Would recommend this to a friend.
Works great
Great product I’ve recommended it to a couple people
By Tony from Nowata on June 03, 2026.
Would recommend this to a friend.
Ceramic spray
Love this stuff
By James from Roseville Illinois on June 02, 2026.
Would recommend this to a friend.
Read all 49 reviews
Frequently asked questions
How long does AMSOIL Exterior Ceramic Spray last?
Exterior Ceramic Spray protects painted and plastic surfaces for up to 12 months per application. Life expectancy depends on environmental conditions, and road salt or excessive dust and dirt can reduce coating life. The product can be reapplied at any interval, and there is no concern with overtreatment.
Does Exterior Ceramic Spray require cure time?
No. The formula requires no cure time. Once a panel is misted and wiped to a streak-free finish with a clean microfiber towel, the vehicle is ready to drive or be parked. No infrared lamps, IPA prep, or extended dry windows are involved.
Is Exterior Ceramic Spray a cleaner or a quick detailer?
No. There are no cleaners in Exterior Ceramic Spray. The formula is intended to be applied to a clean, dry vehicle. For light dust, fingerprints, or water marks between coatings, AMSOIL Quick Detailer is the recommended product for safe cleaning before the next ceramic application.
What surfaces can Exterior Ceramic Spray be applied to?
Exterior Ceramic Spray is formulated for painted and plastic surfaces on automobiles, light trucks, motorcycles, ATVs, UTVs, snowmobiles, and other powersports equipment. Unlike waxes that can dry white on textured plastic, the ceramic formula is compatible with painted bodywork and exterior plastic trim and will not stain.
How is Exterior Ceramic Spray applied?
The vehicle should be washed with AMSOIL High-Foam Car Shampoo and parked in a cool, shaded area before application. Working from the top down, the product is misted onto one panel at a time and wiped immediately with a high-quality microfiber towel. Over-saturation can lead to streaking, so towels should be swapped out as they become loaded.
Will using AMSOIL car-care products void a new vehicle warranty?
No. Using AMSOIL synthetic lubricants, filters, and detailing products does not void a new vehicle or equipment manufacturer warranty, and AMSOIL products are covered by the AMSOIL Limited Warranty.
