AMSOIL Mudslinger® Mud and Dirt Repellent
AMSOIL Mudslinger Mud and Dirt Repellent is a 12-ounce aerosol pre-ride coating built for ATVs, UTVs, and dirt bikes. Sprayed on plastic, fiberglass, and painted surfaces before a wet or muddy ride, the formula lays down a non-stick layer of armor that helps mud, dirt, and snow rinse off with low-pressure water, while a protective film helps counteract the damaging effects of UV rays on exposed bodywork.
Non-stick layer that repels mud, dirt, and snow
Mud, slop, and snow that bake onto plastic body panels, undercarriages, and frames take longer to clean and can dull factory finishes. Mudslinger applies a slick, non-stick film that resists the accumulation of mud, dirt, and snow during the ride, so debris is more likely to release in motion or wash away during cleanup. The result is less ground-in residue on fenders, plastics, and frames after a hard run.
Faster post-ride cleanup with low-pressure water
Once the ride is over, the protective film does most of the work. Mud and dirt rinse off with low-pressure water, reducing scrub time, the need for harsh detergents, and the stress on graphics, decals, and clear coats that comes with aggressive high-pressure washing. For added barrier protection in heavy mud and snow conditions, the spray can be left wet without wiping after application, locking in a longer-lasting release layer for the next ride.
Restores, cleans, and shines plastic and fiberglass
Pre-ride preparation and post-wash detailing also benefit from the formula. Mudslinger restores, cleans, and shines plastic, fiberglass, and painted surfaces, lifting light film and oxidation while leaving a brilliant finish on faded fenders, side panels, and bodywork. Used as part of a regular cleanup routine, the spray helps powersports equipment hold a factory look between deep details.
UV protection for plastic, fiberglass, and painted surfaces
Constant exposure to sun fades plastics, dulls paint, and yellows fiberglass over a season of riding. Mudslinger lays down a protective layer to counteract the damaging effects of UV rays, helping fenders, side panels, and bodywork hold their factory color and finish. The coating is suited to plastic, fiberglass, and painted surfaces on ATVs, UTVs, dirt bikes, and other powersports equipment.
Restored shine and a cherry-scented finish
Beyond protection, Mudslinger restores, cleans, and shines plastic, fiberglass, and painted surfaces. After a 15-minute dry time, wiping the excess with a lint-free microfiber towel produces a brilliant shine without a heavy oily residue. The pleasant cherry scent makes pre-ride prep and post-ride detailing easier on the senses than many solvent-heavy dressings.
Recommended applications and surfaces
Mudslinger is designed for pre-ride use on powersports equipment that sees mud, dust, dirt, snow, and trail debris. The product should only be applied to surfaces that are clean and dry. Shake the can well, then spray evenly and liberally over the target surfaces. Recommended use covers:
- ATVs, UTVs, and dirt bikes used for trail, motocross, dual-sport, snow, and recreational riding.
- Plastic body panels, fiberglass bodywork, and painted metal surfaces on fenders, hoods, side panels, frames, and undercarriages.
- Areas to avoid: pedals, seats, brakes, and brake assemblies, because the slick coating can compromise grip and braking performance.
- Outside the United States: Mudslinger is not available in Canada, and use should be governed by regional product availability.
Allow the spray to dry for 15 minutes, then wipe off the excess with a lint-free microfiber towel for a brilliant shine. For an extra barrier against mud and snow, leave the coating wet and do not wipe; when left wet, the product may attract dust. Reapply after each thorough wash or whenever the protective film is scrubbed away by aggressive cleaning. Aerosol cans may have different disposal requirements than other waste streams, so dispose of contents and container in accordance with all federal, state, provincial, and local regulations.
Order AMSOIL Mudslinger Mud and Dirt Repellent
AMSOIL Mudslinger Mud and Dirt Repellent is available in a 12-ounce spray can (AMSSC-EA) and a case of twelve 12-ounce cans (AMSSC-CA). Mudslinger is backed by the AMSOIL Limited Liability Warranty, and using AMSOIL synthetic lubricants and care products does not void a new vehicle or equipment manufacturer warranty. Match Mudslinger to the right machine with the ATV Oil Guide, confirm application match for related fluids in the AMSOIL Vehicle Lookup Guide, then order AMSOIL Mudslinger Mud and Dirt Repellent.
Customer reviews
Slick
This stuff works great
By Adam on June 04, 2026.
Would recommend this to a friend.
This product is fantastic!
I have seen this product on Legit Street Cars. Alex says he loves this product and doesn't recommend anything else. I totally agree! I need to order more.
By Jim from Fort Wayne, IN on May 01, 2026.
Would recommend this to a friend.
Awesome
Best product one could use. No dirt sticks and always looks new.
By Douglas from Michigan on May 01, 2026.
Would recommend this to a friend.
Read all 98 reviews
Frequently asked questions
What surfaces can Mudslinger be sprayed on?
Mudslinger is formulated for plastic body panels, fiberglass bodywork, and painted surfaces on ATVs, UTVs, and dirt bikes, including fenders, hoods, side panels, frames, and undercarriages. The spray should not be applied to pedals, seats, brakes, or brake assemblies, where a slick non-stick film could reduce grip or braking performance.
How is Mudslinger applied for best results?
Surfaces should be clean and dry before application. Shake the can well, then spray evenly and liberally on the target areas. Allow the coating to dry for 15 minutes, then wipe off the excess with a lint-free microfiber towel for a brilliant shine. For an extra barrier against mud and snow, leave the coating wet and do not wipe; the wet film may attract dust before the next ride.
Does Mudslinger work in snow and winter conditions?
Yes. The protective, non-stick layer is designed to resist the accumulation of mud, dirt, and snow on ATVs, UTVs, and dirt bikes. That makes Mudslinger useful for snow trail riding, slushy spring conditions, and any environment where wet snow tends to pack onto plastic and metal surfaces.
Will Mudslinger leave a greasy finish?
When applied per the directions and wiped down with a lint-free microfiber towel after the 15-minute dry time, Mudslinger restores, cleans, and shines plastic, fiberglass, and painted surfaces with a brilliant finish rather than a heavy gloss. Riders who choose to leave the coating wet for maximum mud and snow protection should expect a wet film that may attract dust until the next ride.
Can Mudslinger be used on cars, trucks, or other equipment?
The product is marketed and tested for ATVs, UTVs, and dirt bikes, with surface compatibility for plastic, fiberglass, and painted surfaces. Owners who apply Mudslinger to other vehicles or equipment should test in an inconspicuous area first and never spray on pedals, seats, brakes, brake assemblies, or any surface that requires consistent grip.
Does using Mudslinger affect the AMSOIL warranty or vehicle warranty?
No. Mudslinger is covered by the AMSOIL Limited Liability Warranty, and using AMSOIL care products does not void a new vehicle or equipment manufacturer warranty. Always follow the directions printed on the can and the guidance in the vehicle owner manual.
Where is Mudslinger available?
Mudslinger ships in a 12-ounce aerosol can as a single (AMSSC-EA) and as a case of twelve cans (AMSSC-CA). The product is currently not available in Canada. Use the order link on this page to buy online.
