BOXO UTV Tool Roll
The BOXO UTV Tool Roll (G3878) is a 66-piece metric tool kit packaged in a compact Cordura nylon roll-up case, built to handle most trailside repairs on Polaris, Can-Am, and similar UTV platforms. The tool selection was put together by trail riders and shop technicians around the bolt sizes and service tasks that come up most often on side-by-side machines, and the roll itself is sized to fit in the typical UTV cargo area, glove box, or trailer.
What is in the roll
The roll contains 66 metric tools across 1/4-inch, 3/8-inch, and 1/2-inch drive sets, plus combination wrenches, pliers, screwdrivers, and an adjustable wrench. The tool list covers the bolt and fastener sizes used on most UTV chassis, suspension, drivetrain, and cooling-system service tasks.
- 1/4-inch drive 12-point sockets: 8, 9, 10, and 13 mm. Plus T30 and T40 1/4-inch drive Torx sockets.
- 3/8-inch drive 12-point sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, and 19 mm.
- 5/8-inch and 13/16-inch spark plug sockets.
- 1/2-inch drive 12-point sockets: 17 and 19 mm. Plus 27 and 30 mm 1/2-inch drive 6-point sockets for axle and hub work.
- 1/4-inch and 3/8-inch 90-tooth hand ratchets for high-engagement turning in tight spaces.
- Metric combination wrenches: 8, 10, 12, 13, 14, 15, 16, 17, 18, and 19 mm.
- 10-inch chrome adjustable wrench.
Cordura roll designed to ride along
The roll itself is stitched from heavy Cordura nylon and includes 24 individual labeled tool pockets so each tool has a fixed home and the contents stay quiet across washboard trails and dune jumps. A removable Velcro pouch handles add-on tools that vary by machine, including diagnostic tools, fuses, zip ties, and small parts. External straps with metal spring buckles secure the roll on chassis racks, in trailer cabinets, or in a UTV bed compartment, and the rolled package fits into spaces a hard tool case will not.
Recommended use
The BOXO UTV Tool Roll is intended as a trail-ready and shop-light tool set, not a full master mechanic's set. The included tools cover the most common roadside and trailside repair scenarios on Polaris RZR, Sportsman, Ranger, and General platforms and on Can-Am Maverick, Maverick X3, Outlander, and Renegade machines. For dedicated garage work, the tool roll pairs with a larger primary tool inventory and serves as the take-along set for ride-day and event-day use.
- Trail-side suspension and skid plate fasteners.
- Spark plug service on most UTV gas engines.
- Fluid service and inspection covers using common metric drain plug sizes.
- Wheel and hub service using the 27 and 30 mm sockets.
- Battery, lighting, and accessory service using the smaller 1/4-inch drive sockets and combination wrenches.
Order the BOXO UTV Tool Roll
The BOXO UTV Tool Roll is sold as a single package under the AMSOIL product code G3878. AMSOIL accessory products are backed by the AMSOIL Limited Liability Warranty. The matching ATV and UTV lubricant program for the machine the tools will be used on is shown in the ATV oil guide and the AMSOIL Vehicle Lookup Guide. Ready to order? Get the BOXO UTV Tool Roll.
Frequently asked questions
Is the tool roll metric or SAE?
The 66-piece set is metric, which matches the bolt and fastener convention on Polaris, Can-Am, Yamaha, Honda, Kawasaki, and most other UTV platforms. SAE-fastened equipment requires a separate set; the spark plug sockets included in this roll are SAE (5/8-inch and 13/16-inch), since spark plug hex sizes are SAE on most engines.
Does the roll fit inside a standard UTV cargo area?
Yes. The roll-up format takes up significantly less space than a hard plastic tool case and was designed to stow in a UTV bed compartment, under a seat, or in a trailer cabinet. External straps with metal spring buckles let the roll be tied off to a roll cage or rack so it does not move on rough trails.
Are the tools warranted?
The BOXO UTV Tool Roll carries the BoxoUSA tool warranty as supplied through AMSOIL. AMSOIL accessory products are also covered by the AMSOIL Limited Liability Warranty. The roll has been tested for use in outdoor conditions, including dust, heat, and moderate rain exposure typical of trail use.
Can the included sockets handle wheel and axle nuts?
The roll includes 1/2-inch drive 27 and 30 mm 6-point sockets that cover most UTV wheel-end and axle nut sizes. For larger or unusual axle nuts, supplement the roll with a model-specific socket.
What is not included in the roll?
The roll is a hand-tool set. It does not include a torque wrench, breaker bar, impact tools, or specialty pullers. Most owners pair the roll with a small torque wrench and a portable air compressor for trail use, plus any vehicle-specific specialty tools called for in the owner's manual.
Is the BOXO UTV Tool Roll compatible with non-Polaris and non-Can-Am machines?
Yes. The metric tool selection covers the common bolt sizes on most UTV platforms, including Yamaha, Honda, Kawasaki, and Kubota side-by-sides. The roll is described as designed for Polaris and Can-Am because those are the most widely used platforms it was designed around, but the tool list is broadly applicable across the metric UTV market.
