Free Shipping on orders of $100 or more Exclusions apply
Shop the Online Store
AMSOIL Bypass Oil Systems
Learn More About Bypass Filtration
Add an AMSOIL Preferred Customer membership to the same cart to unlock up to 25% off qualifying products. Existing members can sign in, and qualifying orders currently over $100 can ship free.
BMK33 is the AMSOIL single-remote bypass system for the Ford 6.7L Power Stroke diesel (2011 and newer Super Duty pickups, F-450, F-550, and medium-duty F-650 and F-750 platforms). The kit ships with the engine-specific mounting head, fittings, hose, and instructions to plumb a single EABP90 element into the Power Stroke lubrication system.
The AMSOIL bypass system is the single-remote bypass system, mounting one EaBP element on a remote bracket. It works in parallel with the engine's full-flow oil filter to remove soot and particles down to two microns and larger, contaminants the standard full-flow filter cannot reach. Adding the system increases the total fluid capacity by approximately 1 quart, depending on the length of the installed hose and the distance between the engine and the mount.
The fitting required to pull pressurized oil from the engine and the return fitting that drops oil back to the sump are typically included for vehicle-specific kits. For the universal kits (BMK21 and BMK23) and for non-cataloged engine families, the source and return fittings should be selected based on the actual port sizes on the engine; AMSOIL Technical Services can recommend the correct sizes.
An AMSOIL bypass filter operates on a partial-flow basis, drawing less than ten percent of the engine's oil-pump output at any moment and routing it through a high-density filter element. Because the bypass element handles a small share of the flow, the media can be much denser than a full-flow filter, capturing soot, sludge, and small wear particles a full-flow filter passes. The cleaned oil returns to the sump, and over the course of an hour the bypass loop typically polishes all of the oil in the system several times.
The result is a continuously cleaner oil sump, slower additive consumption, slower viscosity rise, and reduced rates of bearing, ring, and turbocharger wear. When paired with AMSOIL synthetic motor oil and used-oil analysis, the system supports extended drain intervals well past the OEM-recommended schedule on most heavy-duty diesel and light-duty turbo-diesel pickup applications.
The mount is built from cast aluminum with a steel filter stud and finished in a marine powder-coated paint that resists road salt, debris, and engine compartment chemistry. The included fittings, hose, and clamps are sized for the operating pressure and temperature of typical light-duty and heavy-duty diesel and gasoline applications. Detailed installation instructions cover plumbing decisions, mounting locations, and a step-by-step process to bleed the system after the first start.
Confirm fit by year, make, model, and engine in the AMSOIL Vehicle Lookup Guide before ordering. The matching synthetic motor oil and full-flow filter program is summarized in the AMSOIL diesel oil guide and the oil filter guide.
The AMSOIL Bypass Filter element should be replaced at the limits published for its size, whichever comes first.
| Element | Mileage | Hours | Time |
|---|---|---|---|
| EABP90 | 60,000 mi (96,500 km) | 600 hr | 2 years |
| EABP100 | 70,000 mi (112,600 km) | 800 hr | 2 years |
| EABP110 | 80,000 mi (128,700 km) | 1,200 hr | 2 years |
| EABP120 | 120,000 mi (193,100 km) | 1,800 hr | 1 year |
Bypass element life depends on duty cycle. Used-oil analysis is the recommended way to confirm the interval is appropriate for the engine, the operating environment, and the AMSOIL synthetic motor oil in service.
The BMK33 is sold as a complete kit with the mount, hose, fittings, hardware, instructions, and bypass element listed above. AMSOIL Bypass Systems are backed by the AMSOIL Limited Liability Warranty. Confirm the right system for the engine in the AMSOIL Vehicle Lookup Guide and review the matching filter program in the oil filter guide, then order the AMSOIL Ford 6.7L Single-Remote Bypass System.
No. Installing an AMSOIL Bypass System does not void a new vehicle warranty when the system is installed correctly and does not modify the engine itself. The Magnuson-Moss Warranty Act prevents an OEM from voiding the warranty solely for adding a bypass loop to the existing lubrication system, and AMSOIL bypass parts are backed separately by the AMSOIL Limited Liability Warranty.
No. The bypass element works in parallel with the engine's standard full-flow oil filter, not in place of it. The full-flow filter still handles the immediate moment-to-moment lubrication load, while the bypass element polishes the same oil over the course of operation.
This system is sized for the EABP90 bypass element. The element ships with the kit and is also stocked as a service-replacement part for future filter changes.
Adding the BMK33 system increases total fluid capacity by approximately 1 quart. The actual amount depends on the length of installed hose and the distance from the engine to the mount. Top off after installation, then verify the level with the engine dipstick after a full warm-up cycle.
Yes. The kit includes detailed installation instructions, and most installations can be completed by a competent home mechanic with standard hand tools and basic plumbing. Common installer decisions include the source-port location for pressurized oil and the return-port location near the oil pan; AMSOIL Technical Services can recommend specific port locations on engines without a published kit.
Yes. AMSOIL recommends pairing extended drain intervals with periodic used-oil analysis. The oil analysis report confirms wear-metal levels, fuel and water contamination, oxidation, and remaining additive life so the actual drain interval can be set based on data rather than a fixed schedule.